3000 PSI Fiber-Reinforced delivered in Bradfordville, FL
3000 PSI with synthetic fiber reinforcement — reduces shrinkage cracking in Florida slabs without wire mesh.
With roughly 19,000 residents across 13 ZIP codes (32053, 32059, 32309…), Bradfordville is the second-largest of the 2 Leon County communities we serve.
3000 PSI Fiber-Reinforced in Bradfordville — the quick facts
- Price
- typical $150–$220/yd³
- Prices reviewed
- August 2026
- Minimum
- 1 yd³ — no short-load fee
- Billing
- metered: pay for actual yards poured
- Local ground
- rolling red-clay hills (Ultisols, Orangeburg-type) in the north, transitioning to sandy flatwoods to the south
- Best months
- October-June
- Strength (28-day)
- 3,000 PSI
Technical specifications
- 28-day strength
- 3,000 PSI
- Slump
- 4–5 in
- Fiber
- synthetic micro-fiber, 1.5 lb/yd³
- Typical uses
- slabs on sandy soil, patios, high-shrinkage conditions
Typical Bradfordville area range: $150–$220/yd³ delivered
A typical 2-yard pour ≈ $300–$440 delivered, all-in.
We're expanding coverage here. Get your project priced and you're first in line when a local operator comes online.
Price my projectJoin the priority list
Typical pricing by email today — and we’ll text you the moment your area opens. No account needed.
Frequently asked questions
How much does 3000 PSI Fiber-Reinforced delivery cost in Bradfordville?
Typical Florida pricing for 3000 PSI Fiber-Reinforced runs $150–$220/yd³ delivered. We're expanding coverage in Bradfordville — price your project and you're first in line.
When should I schedule a pour in Bradfordville?
A long season with real winters: Tallahassee sees frost and freezes Dec-Feb, so keep curing blankets ready, and pour mornings ahead of Jun-Sep afternoon storms.
Which Bradfordville ZIP codes do you deliver to?
We map all 13 Bradfordville ZIP codes, including 32053, 32059 and 32309. Pricing is per ZIP — enter yours in the form and it's checked instantly.
Does fiber replace rebar or mesh?
Fiber controls plastic-shrinkage cracking and can replace mesh in flatwork like patios or shed slabs. It does not replace structural rebar in footings or thick structural sections.
Fiber mix or plain 3000 PSI — which should I choose?
Both are 3000 PSI; the fiber version adds synthetic micro-fiber that controls the fine shrinkage cracking Florida's sandy, fast-draining soils invite. It's worth it for patios, shed slabs and exposed flatwork. Plain 3000 is fine under tile or where mesh is already specified.
Will the fibers show on the finished surface?
A few stray fibers can show right after finishing, then wear or burn off within a few weeks — they're not visible once the slab is in service. For a decorative stamped or broom finish we adjust the finishing pass.