3000 PSI Fiber-Reinforced delivered in Cheval, FL
3000 PSI with synthetic fiber reinforcement — reduces shrinkage cracking in Florida slabs without wire mesh.
Cheval is one of 32 Hillsborough County communities we serve, home to about 13,000 people across ZIP code 33558.
3000 PSI Fiber-Reinforced in Cheval — the quick facts
- Price
- typical $150–$220/yd³
- Prices reviewed
- September 2026
- Minimum
- 1 yd³ — no short-load fee
- Billing
- metered: pay for actual yards poured
- Local ground
- Myakka fine sand flatwoods (Florida's state soil), poorly drained with seasonal high water tables
- Best months
- October-May
- Strength (28-day)
- 3,000 PSI
Technical specifications
- 28-day strength
- 3,000 PSI
- Slump
- 4–5 in
- Fiber
- synthetic micro-fiber, 1.5 lb/yd³
- Typical uses
- slabs on sandy soil, patios, high-shrinkage conditions
Typical Cheval area range: $150–$220/yd³ delivered
A typical 2-yard pour ≈ $300–$440 delivered, all-in.
We're expanding coverage here. Get your project priced and you're first in line when a local operator comes online.
Price my projectJoin the priority list
Typical pricing by email today — and we’ll text you the moment your area opens. No account needed.
Frequently asked questions
How much does 3000 PSI Fiber-Reinforced delivery cost in Cheval?
Typical Cheval-area pricing for 3000 PSI Fiber-Reinforced runs $150–$220/yd³ delivered. We're expanding coverage in Cheval — price your project and you're first in line.
When should I schedule a pour in Cheval?
Oct-May is the dependable window; summer pours should be scheduled early morning ahead of afternoon storms. The tri-county area (with Pasco and Hernando) is Florida's most sinkhole-active region - karst is a known factor in local geotechnical work.
Which Cheval ZIP codes do you deliver to?
In Cheval we map ZIP code 33558. Pricing is per ZIP — enter yours in the form and it's checked instantly.
Does fiber replace rebar or mesh?
Fiber controls plastic-shrinkage cracking and can replace mesh in flatwork like patios or shed slabs. It does not replace structural rebar in footings or thick structural sections.
Fiber mix or plain 3000 PSI — which should I choose?
Both are 3000 PSI; the fiber version adds synthetic micro-fiber that controls the fine shrinkage cracking Florida's sandy, fast-draining soils invite. It's worth it for patios, shed slabs and exposed flatwork. Plain 3000 is fine under tile or where mesh is already specified.
Will the fibers show on the finished surface?
A few stray fibers can show right after finishing, then wear or burn off within a few weeks — they're not visible once the slab is in service. For a decorative stamped or broom finish we adjust the finishing pass.