3000 PSI Fiber-Reinforced delivered in Oakleaf Plantation, FL
3000 PSI with synthetic fiber reinforcement — reduces shrinkage cracking in Florida slabs without wire mesh.
Every Oakleaf Plantation quote is priced to its exact ZIP — 15 ZIP codes (32009, 32026, 32040…) — and it's the second-largest of the 3 Clay County communities we serve, with about 31,000 residents.
3000 PSI Fiber-Reinforced in Oakleaf Plantation — the quick facts
- Price
- typical $150–$220/yd³
- Prices reviewed
- August 2026
- Minimum
- 1 yd³ — no short-load fee
- Billing
- metered: pay for actual yards poured
- Local ground
- sandy flatwoods with clay-enriched subsoil (Ultisols), plus deep well-drained sands on Trail Ridge
- Best months
- October-June
- Strength (28-day)
- 3,000 PSI
Technical specifications
- 28-day strength
- 3,000 PSI
- Slump
- 4–5 in
- Fiber
- synthetic micro-fiber, 1.5 lb/yd³
- Typical uses
- slabs on sandy soil, patios, high-shrinkage conditions
Typical Oakleaf Plantation area range: $150–$220/yd³ delivered
A typical 2-yard pour ≈ $300–$440 delivered, all-in.
We're expanding coverage here. Get your project priced and you're first in line when a local operator comes online.
Price my projectJoin the priority list
Typical pricing by email today — and we’ll text you the moment your area opens. No account needed.
Frequently asked questions
How much does 3000 PSI Fiber-Reinforced delivery cost in Oakleaf Plantation?
Typical Florida pricing for 3000 PSI Fiber-Reinforced runs $150–$220/yd³ delivered. We're expanding coverage in Oakleaf Plantation — price your project and you're first in line.
When should I schedule a pour in Oakleaf Plantation?
Longer season than the peninsula, with summer storms (Jun-Sep) and occasional Dec-Feb freezes calling for curing blankets on overnight pours.
Which Oakleaf Plantation ZIP codes do you deliver to?
We map all 15 Oakleaf Plantation ZIP codes, including 32009, 32026 and 32040. Pricing is per ZIP — enter yours in the form and it's checked instantly.
Does fiber replace rebar or mesh?
Fiber controls plastic-shrinkage cracking and can replace mesh in flatwork like patios or shed slabs. It does not replace structural rebar in footings or thick structural sections.
Fiber mix or plain 3000 PSI — which should I choose?
Both are 3000 PSI; the fiber version adds synthetic micro-fiber that controls the fine shrinkage cracking Florida's sandy, fast-draining soils invite. It's worth it for patios, shed slabs and exposed flatwork. Plain 3000 is fine under tile or where mesh is already specified.
Will the fibers show on the finished surface?
A few stray fibers can show right after finishing, then wear or burn off within a few weeks — they're not visible once the slab is in service. For a decorative stamped or broom finish we adjust the finishing pass.